We require a badge in the area, please bring your badge with you.
-
Day 1 - 11.09.2025
-
Day 2 - 12.09.2025
-
Day 3 - 13.09.2025
-
Main Hall
-
Oral Presentation Hall 1
-
Oral Presentation Hall 2
-
Oral Presentation Hall 3
-
Oral Presentation Hall 4
-
Oral Presentation Hall 5
| Time | Chairs | Speaker | Lecture | |
| 09:00 - 18:00 | Registration | |||
| 09:00 - 09:05 | Prof. Dr. Mehmet Ali Kılıçarslan | Welcome and opening | ||
| 09:05 - 09:10 | Prof. Dr. Yasemin Kulak Özkan | Welcome and opening | ||
| 09:10 - 09:55 | Prof. Dr. Pınar Kursoğlu | Prof. Dr. Özgür İnan | Prof. Dr. Burcu Özsoy | Climate Change and Polar Regions |
| 09:55 - 10:00 | Introduction of Oxford Lecture | |||
| 10:00 - 11:00 | Prof.Dr. Çetin Sevük | Prof. Dr. Atilla User | Prof.Dr.Mutlu Özcan | The Impact of Advances in Material Science and Technologies on the Dental Profession: From the Past to the Future |
| 11:00 - 11:15 | Coffee Break | |||
| 11:15 - 12:15 | Prof. Dr. Hana Hubalkova | Prof. Dr. F. Betül Tuncelli | Dr. Emanuele Cicero | Complete Mouth Rehabilitation in Fixed prosthodontics: An Individualized Approach |
| 12:15 - 13:15 | Prof. Dr. Fatih Mehmet Korkmaz | Prof. Dr. Zelal Seyfioğlu Polat | Prof.Dr.Brian Millar | The Digital Impact |
| 13:15 - 14:15 | Lunch | |||
| 14:15 - 15:15 | Prof.Dr. Akın Aladağ | Prof. Dr. Hanefi Kurt | Prof.Dr. Pınar Kursoğlu | Bruxism and Its Clinical Management: Occlusal Splints From Conventional to Digital Approaches |
| 15:15 - 16:15 | Prof. Dr. Suresh Nayar | Prof. Dr. Işıl Sarıkaya | Prof. Dr. Pekka Vallittu | The Foggy Border Between Prosthodontics and Restorative Dentistry |
| 16:15 - 16:30 | Coffee Break | |||
| 16:30 - 17:30 | Prof. Dr. Jenni Hjerppe | Prof. Dr. Şebnem Büyükkaplan | Prof. Dr. Kaan Orhan | Artificial Intelligence and Blockchain in Dentistry and Prosthodontics: What Does the Future Hold? |
| 17:30 - 18:30 | Prof. Dr. Özgün Yusuf Özyılmaz | Prof. Dr. Canan Bural | Prof.Dr. Guillermo Pradies | From Radiological Planning to Prosthetically Driven Implant Placement: The Current Role of IA and Robotics. |
| 19:30 - 22:00 | Welcome Reception / Zemi Hotel | |||
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 14:15 - 14:30 | Athanasios Stratos | "Prosthodontic driven full-mouth rehabilitation of a class III malocclusion with orthodontics, orthognathic surgery and implant supported restorations: A multidisciplinary case report" | ASSOC. PROF. DR. ZEYNEP BAŞAĞAOĞLU DEMİREKİN |
| 14:30 - 14:45 | Özge Eroğlu | Tooth Shade Diversity: A Study of Age, Gender, and Ethnic Differences | ASSOC. PROF. DR. ZEYNEP BAŞAĞAOĞLU DEMİREKİN |
| 14:45 - 15:00 | Duygu Kürklü Arpaçay | Beyond Aesthetic Demand: A Validated Instrument for Identifying Body Dysmorphic Disorder in Dental Settings | ASSOC. PROF. DR. ZEYNEP BAŞAĞAOĞLU DEMİREKİN |
| 15:00 - 15:15 | Elif Nur Koroglu | Effect of mechanical aging and steam autoclaving on the accuracy of different mechanical torque limiting devices | ASSOC. PROF. DR. ZEYNEP BAŞAĞAOĞLU DEMİREKİN |
| 15:15 - 15:30 | Nasim Mohammadpour | "Comparison of gnathological parameters in edentulous patients using conventional methods and 3D-CBCT." | ASSOC. PROF. DR. ZEYNEP BAŞAĞAOĞLU DEMİREKİN |
| 15:30 -15:45 | Sümeyye Selvi | Making the Right Choice: Clinical Insights into Extraoral vs. Intraoral Photogrammetry for Full-Arch Implant Cases | ASSOC. PROF. DR. ZEYNEP BAŞAĞAOĞLU DEMİREKİN |
| 15:45 - 16:00 | Ramin Mosharraf | The mandibular overdenture with custom-made subperiosteal implant (A case report) | ASSOC. PROF. DR. FEHMİ GÖNÜLDAŞ |
| 16:00 - 16:15 | Cansu Bolat | The Effect of Scan Body Material and Exposure on Implant Positioning in CAD-CAM | ASSOC. PROF. DR. FEHMİ GÖNÜLDAŞ |
| 16:15 - 16:30 | Fatma Beyza Koyuncu | Investigation of the Bond Strength of Dentin Subjected to Different Contaminants with Self-Adhesive Resin Cements | ASSOC. PROF. DR. FEHMİ GÖNÜLDAŞ |
| 16:30 - 16:45 | Pouya Jamalpour | Investigation of bonding strength of minimally invasive and aesthetic adhesive attachments | ASSOC. PROF. DR. FEHMİ GÖNÜLDAŞ |
| 16:45 - 17:00 | Kubra Yildiz Domanic | Influence of Implant Angulation on Stress Distribution in Mandibular Overdentures with Locator and Ball Attachments | ASSOC. PROF. DR. FEHMİ GÖNÜLDAŞ |
| 17:00 - 17:15 | Elif Yılmaz Biçer | Effects of restoration thickness and cement shade on the prediction of the final color of the 3D-printed photopolymer restorations | ASSOC. PROF. DR. FEHMİ GÖNÜLDAŞ |
| 17:15 - 17:30 | Rana Turunç | Language-Based Performances of Different Large Language Models in the Diagnosis of Temporomandibular Disorders | ASSOC. PROF. DR. GÜLSÜM SAYIN ÖZER |
| 17:30 - 17:45 | Nazlı Nihal Sarıbacak | Perception of Artificial Intelligence–Assisted Smile Designs Across Educational Levels: A Questionnaire Study | ASSOC. PROF. DR. GÜLSÜM SAYIN ÖZER |
| 17:45 - 18:00 | Selin Çakır | Influence of surface-conditioning strategies on the optical properties of 3D-printed and milled zirconia | ASSOC. PROF. DR. GÜLSÜM SAYIN ÖZER |
| 18:00 - 18:15 | ASSOC. PROF. DR. GÜLSÜM SAYIN ÖZER | ||
| 18:15 - 18:30 | Ilhem Ben Othmen | Conservative aesthetic restoration of anterior teeth using digital technology and injectable resin: a case report | ASSOC. PROF. DR. GÜLSÜM SAYIN ÖZER |
| 18:30 - 18:45 | Kübra Değirmenci | Gender effect on the threshold values for perceptibility and acceptability of color difference | ASSOC. PROF. DR. GÜLSÜM SAYIN ÖZER |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 14:15 - 14:30 | Serra Küçükkılıç Gündüz | Color Change in Occlusal Splints: The Role of Manufacturing Method and Polishing | ASSOC. PROF. DR. SİBEL DİKİCİER |
| 14:30 - 14:45 | Teuta Pustina Krasniqi | Effects of zirconium-based toothpaste concentrations on tooth shade improvement: an in vitro study | ASSOC. PROF. DR. SİBEL DİKİCİER |
| 14:45 - 15:00 | Semih Akdoğan | Surface Finishings and Aging Effects on 3D-Printed Permanent Resin Material | ASSOC. PROF. DR. SİBEL DİKİCİER |
| 15:00 - 15:15 | Aleyna Meltem Büyüksefil | Determination of the Incidence of Patients with Missing Teeth According to the Kennedy Classification | ASSOC. PROF. DR. SİBEL DİKİCİER |
| 15:15 - 15:30 | Ulaş Bora Aktaş | Investigation of color change of temporary crowns produced with 3D printers after thermal aging | ASSOC. PROF. DR. SİBEL DİKİCİER |
| 15:30 -15:45 | Elif Tuba Akçin | The effect of pH level of artificial saliva on adhesion of soft relining materials to 3D printed denture base | ASSOC. PROF. DR. SİBEL DİKİCİER |
| 15:45 - 16:00 | Emre Aslan | The Effect Of Different Surface Finishing Procedures On The Color And Translucency Of Monolithic Zirconia After Low Temperature Degradation | ASSOC. PROF. DR. GAYE SAĞLAM |
| 16:00 - 16:15 | Selin Çelik Öge | Phase transformation and biaxial flexural strength of additively and subtractively manufactured zirconia: Effect of grinding and regeneration firing | ASSOC. PROF. DR. GAYE SAĞLAM |
| 16:15 - 16:30 | Taygun Sezer | Effect of Repeated Sterilization and Scan Body Type on Digital Impression Trueness | ASSOC. PROF. DR. GAYE SAĞLAM |
| 16:30 - 16:45 | Irem Sarkaya | Prosthetic rehabilitation with custom made subperiosteal implant in atrophic posterior mandible: a case report | ASSOC. PROF. DR. GAYE SAĞLAM |
| 16:45 - 17:00 | Umut Berk Can Ayten | {"Surgical and fixed prosthetic treatment of a patient with ectodermal dysplasia: a case report"} | ASSOC. PROF. DR. GAYE SAĞLAM |
| 16:45 - 17:00 | Umut Baran Sönmez | Benchmarking of Different Natural Language Processing Models for the Implant-Supported Prostheses Regarding Accuracy | ASSOC. PROF. DR. GAYE SAĞLAM |
| 17:15 - 17:30 | Özge Turhan | Comparison of the effect of bleaching agent application on adhesive system bonding efficacy depending on immediate or delayed cementation procedures | ASSOC. PROF. DR.ŞULE TUĞBA DENİZ |
| 17:30 - 17:45 | Izim Turker Kader | Evaluating the Conversion Degree of 3D-printed Occlusal Splint Resin Produced by Different Printing Technologies | ASSOC. PROF. DR.ŞULE TUĞBA DENİZ |
| 17:45 - 18:00 | Zeynep Akyıldız Yıldırım | Title: Full-Mouth Rehabilitation Using Lithium Disilicate Crowns in a Patient with Amelogenesis Imperfecta: A Clinical Case Report | ASSOC. PROF. DR.ŞULE TUĞBA DENİZ |
| 18:00 - 18:15 | Amr Abu Ghofa | Trueness of Digital Scans Obtained with Different Scanning Strategies | ASSOC. PROF. DR.ŞULE TUĞBA DENİZ |
| 18:15 - 18:30 | Kübra Songül Bozan | Effect of Dietary Solvents and Cleansers on Color Stability of Denture Teeth | ASSOC. PROF. DR.ŞULE TUĞBA DENİZ |
| 18:30 - 18:45 | Suela Hoxha | Optical properties of modern cad/cam dental ceramics | ASSOC. PROF. DR.ŞULE TUĞBA DENİZ |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 14:15 - 14:30 | İkbal Leblebicioglu Kurtulus | Definitive Restoration Fabrication Using the Superimposition Technique in Full-Arch Implant-Supported Prostheses | ASSOC. PROF. DR. FULYA BASMACI |
| 14:30 - 14:45 | Şeyma Hacıaliefendioğlu | Investigation of bond strength of dual-cure resin cement with different expiry dates to a nanohybrid ceramic with different surface treatment | ASSOC. PROF. DR. FULYA BASMACI |
| 14:45 - 15:00 | Ceren Akın | Impact of Different Splinting Materials on Accuracy in Open Tray Impressions for All-on-Four Implant Protocol | ASSOC. PROF. DR. FULYA BASMACI |
| 15:00 - 15:15 | Gökçe Naz Cömert | Effect of Simulated Gastric Acid on Optical and Surface Properties of Monolithic Restorative Materials | ASSOC. PROF. DR. FULYA BASMACI |
| 15:15 - 15:30 | Muammer Alhan Babat | Shear Bond Strength of Orthodontic Brackets to 3D-Printed Permanent Resin Materials: A Pilot Study | ASSOC. PROF. DR. FULYA BASMACI |
| 15:30 -15:45 | Gamze Mutlu | Screw-retained monolithic zirconia restorations on Ti-base abutments in limited vertical space: a case report | ASSOC. PROF. DR. FULYA BASMACI |
| 15:45 - 16:00 | Benedict Cahyadi | A Novel Two-Step Milling Technique for Precise Tooth Positioning in Digital Dentures: A Clinical Case Report | ASSOC. PROF. DR. MEHMED ESAD GÜVEN |
| 16:00 - 16:15 | Aysenur Kara | Evaluation of Surface Roughness and Gloss Changes in Occlusal Splint Materials Fabricated by Conventional and Digital Methods | ASSOC. PROF. DR. MEHMED ESAD GÜVEN |
| 16:15 - 16:30 | Mehmet Berk Kaffaf | Comparison of 3D Facial Scanning and Direct Anthropometry in Determining Occlusal Vertical Dimension: A Pilot Study | ASSOC. PROF. DR. MEHMED ESAD GÜVEN |
| 16:30 - 16:45 | Nihal Karadeniz | Evaluation of the color change of CAD/CAM ceramics subjected to different surface finishing procedures | ASSOC. PROF. DR. MEHMED ESAD GÜVEN |
| 16:45 - 17:00 | Azza Hrabi | Managing developmental enamel defects with minimally invasive prosthetics: case series | ASSOC. PROF. DR. MEHMED ESAD GÜVEN |
| 17:00 - 17:15 | Merve Nur Köroğlu | Evaluation of {Staphylococcus aureus} Adhesion on Modified PEEK and PEKK Surfaces | ASSOC. PROF. DR. MEHMED ESAD GÜVEN |
| 17:15 - 17:30 | Haniye Emin Yayla | The impact of scanning procedures on the trueness of digital impressions across different intraoral scanners: an in vitro study | ASSOC. PROF. DR. BEYZA ÜNALAN DEĞİRMENCİ |
| 17:30 - 17:45 | Dilara Gülmez | Comparison of Motor Skills and Technological Adaptation Using a Virtual Reality Dental Simulator | ASSOC. PROF. DR. BEYZA ÜNALAN DEĞİRMENCİ |
| 17:45 - 18:00 | Süheyla Esen | Effect of Coffee Immersion on Color Stability and Surface Roughness of Denture Base and Liners | ASSOC. PROF. DR. BEYZA ÜNALAN DEĞİRMENCİ |
| 18:00 - 18:15 | Mustafa Kılıç | Full Mouth Monotic Zirconia Rehabilitation of a Patient with Decreased Occlusal Vertical Dimension with Digital Workflow: Oral Presentation | ASSOC. PROF. DR. BEYZA ÜNALAN DEĞİRMENCİ |
| 18:15 - 18:30 | Sina Saygılı | Accuracy of Implant-Supported Reverse Scanning in the Edentulous Maxilla: Influence of Scanner Type | ASSOC. PROF. DR. BEYZA ÜNALAN DEĞİRMENCİ |
| 18:30 - 18:45 | Fatma Nihan Terzi Topal | Effect of Post curing Time and Solution Type on the Color Stability of 3D Printed Dental Resin Specimens | ASSOC. PROF. DR. BEYZA ÜNALAN DEĞİRMENCİ |
| Presenter | Topic | Chair | |
|---|---|---|---|
| 14:15 - 14:30 | Büşra Nur Azgın | Effect of Shear Bond Strength of Glass Ceramic Treated with Different Primers After Thermal Cycling | ASSOC. PROF. DR. HAYDAR ALBAYRAK |
| 14:30 - 14:45 | Bahar Mılan | Using PEEK Coping Beneath an E.max Crown for Stress Absorption and Discoloration Masking in a Structurally Compromised Central Incisor | ASSOC. PROF. DR. HAYDAR ALBAYRAK |
| 14:45 - 15:00 | Simanur Bayyıldız | Fractal evaluation of overdenture patients with two different attachment types | ASSOC. PROF. DR. HAYDAR ALBAYRAK |
| 15:00 - 15:15 | Enes Ekinci | What Is The Issue? Layer Thickness or The Specialty of The Microorganism | ASSOC. PROF. DR. HAYDAR ALBAYRAK |
| 15:15 - 15:30 | Paniz Hobbi | Assessing the Permanence of 3D-Printed Resin Composite Posterior Fixed Dental Prostheses: A 3-Year Prospective Clinical Trial | ASSOC. PROF. DR. HAYDAR ALBAYRAK |
| 15:30 -15:45 | Burcu Gözetici Çil | Periodontal status of indirect resin composite restorations with proximal box elevation: 3-year clinical results | ASSOC. PROF. DR. HAYDAR ALBAYRAK |
| 15:45 - 16:00 | Mehmet Çağatay Ulucan | The Effects of Different pH Levels of Artificial Saliva on 3D-Printed Permanent Resin Material | ASSOC. PROF. DR. NECLA DEMİR |
| 16:00 - 16:15 | Zeynep Ozturk | Comparison of Trueness of Digital and Conventional Impression Pathways | ASSOC. PROF. DR. NECLA DEMİR |
| 16:15 - 16:30 | Ekin Gazioğlu | Surface properties and color stability of additively manufactured interim restorations: the role of surface treatments and mouth rinses | ASSOC. PROF. DR. NECLA DEMİR |
| 16:30 - 16:45 | Yousser Athimni | Cost, safety, ethics: rethinking implant component reuse— a systematic review | ASSOC. PROF. DR. NECLA DEMİR |
| 16:45 - 17:00 | Hilal Uçak | From design to plaque: evaluating hygienic efficiency of pontic types with artificial plaque simulation | ASSOC. PROF. DR. NECLA DEMİR |
| 17:00 - 17:15 | Nafia Ebru Polat Aydoğdu | Investigation of the Awareness Levels of Patients Applying to Atatürk University Faculty of Dentistry Regarding Implant-Supported Prostheses and the Factors Influencing This Awareness | ASSOC. PROF. DR. NECLA DEMİR |
| 17:15 - 17:30 | Esin Özel | Comparative Assessment Of Burnout Levels Among Dentists Treating Pediatric And Geriatric Patients | ASSOC. PROF. DR. SEMA MURAT |
| 17:30 - 17:45 | Simge Dagistan | Trueness and internal fit of 3-unit monolithic zirconia restorations: A comparison of additive and subtractive manufacturing methods | ASSOC. PROF. DR. SEMA MURAT |
| 17:45 - 18:00 | Puren Barut | Which cleaning protocols best preserve the surface roughness and hardness of occlusal splints produced by additive, subtractive and conventional manufacturing? | ASSOC. PROF. DR. SEMA MURAT |
| 18:00 - 18:15 | Özer Işisağ | Flexural Strength and Weibull Analysis of Boron Oxide-Modified Dental Feldspathic Ceramics | ASSOC. PROF. DR. SEMA MURAT |
| 18:15 - 18:30 | Berk Bilgen | Assessment of Removable Partial Denture Complications in Relation to Classification Systems: A Pilot Study | ASSOC. PROF. DR. SEMA MURAT |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 14:15 - 14:30 | Ayşe Tekin | Effect of Bubble Tea on the Color Stability of Restorative CAD/CAM Blocks | ASSOC. PROF. DR. MEHMET UĞUR |
| 14:30 - 14:45 | Rumeysa Yıldırım | Fracture Resistance of Ceramic Crowns Cemented on Different Types of Abutments | ASSOC. PROF. DR. MEHMET UĞUR |
| 14:45 - 15:00 | Gönül Merve Eyüboğlu Ateş | Effect of Different Surface Treatments on Bond Strength to Monolithic Zirconia: An In Vitro Study | ASSOC. PROF. DR. MEHMET UĞUR |
| 15:00 - 15:15 | Atahan Erdalı | Long-Term Prosthodontic Outcomes After Alveolar Distraction Osteogenesis in the Atrophic Maxilla: A 20-Year Follow-Up | ASSOC. PROF. DR. MEHMET UĞUR |
| 15:15 - 15:30 | Amani Djebbi | Anterior ceramic restorations: navigating the spectrum of esthetic materials | ASSOC. PROF. DR. MEHMET UĞUR |
| 15:30 -15:45 | Ayse Nur Üredi | A Bibliometric Analysis of Additive Manufacturing in Dentistry: Historical Overview | ASSOC. PROF. DR. MEHMET UĞUR |
| 15:45 - 16:00 | Ela Türmeli | Stress Distribution in Angled Multi-Unit Abutment Prosthetic Screws: A Finite Element Analysis | DR. BERK BİLGEN |
| 16:00 - 16:15 | Naz Doğan | Functional and Esthetic Rehabilitation Using Digital Planning in a Case with Deep Bite and Gummy Smile | DR. BERK BİLGEN |
| 16:15 - 16:30 | Hande Çakmak | Temporomandibular Disorder and Current Treatment Methods | DR. BERK BİLGEN |
| 16:30 - 16:45 | Helin Su Akyol | In-vivo analysis of clinical workflow impact on denture base fabrication: conventional vs digital methods | DR. BERK BİLGEN |
| 16:45 - 17:00 | Aybüke Orhan Üner | Effect of multiple firings on resin bond strength of CAD/CAM ceramics | DR. BERK BİLGEN |
| 17:00 - 17:15 | Muhammed Furkan Araz | Effect of Finishing Procedures and Adhesive Cement Shades on the Optical Properties of Monolithic Zirconia | DR. BERK BİLGEN |
| 17:15 - 17:30 | Ediz Ünal | Digitally Driven, Esthetically Defined: Conservative, Predictable, and Functional Solutions with Porcelain Veneers | ASSOC. PROF. DR. BERİVAN DÜNDAR YILMAZ |
| 17:30 - 17:45 | Güneş Deniz Tekiz | Full-Arch Rehabilitation of a Severely Atrophic Edentulous Jaws Using the All-on-Four Protocol: A Case Report | ASSOC. PROF. DR. BERİVAN DÜNDAR YILMAZ |
| 17:45 - 18:00 | Leyla Tutuş | Evaluation Of Fracture Strength And Stress Distribution Of Cad-Cam Post-Core Systems Produced From Different Materials | ASSOC. PROF. DR. BERİVAN DÜNDAR YILMAZ |
| 18:00 - 18:15 | İrem Taştaban | Immediate Loading in Implant Supported Prosthesis by Digital Workflow and Follow Up: Case Report | ASSOC. PROF. DR. BERİVAN DÜNDAR YILMAZ |
| 18:15 - 18:30 | Sena Koca | Oral rehabilitation of a complicated case with malposed teeth and implants using full digital workflow: A case report | ASSOC. PROF. DR. BERİVAN DÜNDAR YILMAZ |
-
Main Hall
-
Oral Presentation Hall 1
-
Oral Presentation Hall 2
-
Oral Presentation Hall 3
-
Oral Presentation Hall 4
-
Oral Presentation Hall 5
| Time | Chairs | Speaker | Lecture | |
| 09:00 - 10:00 | Prof. Dr. Ebru Karabece Çal | Prof. Dr. Hasan Önder Gümüş | Prof. Dr.Evren Kilinc | Revolutionizing Direct Composite Dentistry with Digital Innovations |
| 10:00 - 11:00 | Prof. Dr. Hakan Terzioğlu | Prof. Dr. Emine Göncü Başaran | Prof. Dr. Burak Yılmaz | Possibilities for Sustainable Prosthodontic Manufacturing |
| 11:00 - 11:15 | Coffee Break | |||
| 11:15 - 12:15 | Prof. Dr. Norina Forna | Prof. Dr. Zeynep Yeşil | Stefan Roozen | Innovating Aesthetics: Cutting-Edge Ceramic Solutions for Efficiency and Perfection |
| 12:15 - 13:15 | Prof. Dr. Ayşe Meşe | Prof. Dr. Süha Türkaslan | Prof .Dr. Chikario Okubo | Concepts and Clinical Practice of Implant Removable Partial Dentures |
| 13:15 - 14:15 | Lunch | |||
| 14:15 - 15:15 | Prof. Dr. Canan Akay | Prof. Dr. Arzu Atay | Dr. Adham El-Sayed | Begin with the End in Mind: Backward Planning for Perfect Smiles |
| 15:15 - 16:15 | Prof. Dr. Rafael Martinez de Fuentes | Prof. Dr. Çağrı Ural | Prof.Dr. Kenneth Kurtz | Dental Implant Intervention for Syndromic & Non-Syndromic Childhood Partial Edentulism |
| 16:15 - 16:30 | Coffee Break | |||
| 16:30 - 17:30 | Prof. Dr. Barış Güncü | Prof. Dr. Orhun Ekren | Prof.Dr. Magda Mensi | Guided Biofilm Therapy: Prevention and Maintenance on Implant and Non-Surgical Treatment of Peri-Implantitis |
| 17:30 - 18:30 | Prof. Dr. Nuran Yanıkoğlu | Prof. Dr. Funda Bayındır | Prof .Dr. Nadim Z. Baba | The Digital Transformation of Complete Denture Prosthodontics |
| 20:30 - 00:00 | Gala Dinner | |||
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 09:00 - 09:15 | Sinem Kantarcioglu | The impact of different surface treatments on bond strength of resin cement to 3D-printed permanent crown material | ASSOC. PROF. DR. İKBAL LEBLEBİCİOĞLU KURTULUŞ |
| 09:15 - 09:30 | Şehla Irem Eren Kutlu | Crown Application on Tooth Number 21 with Horizontal Fracture Due to the Trauma | ASSOC. PROF. DR. İKBAL LEBLEBİCİOĞLU KURTULUŞ |
| 09:30 - 09:45 | Oktay Çataltepe | Evaluation of surface treatment effects on the color stability of high-translucent zirconia under acidic and thermocycling conditions | ASSOC. PROF. DR. İKBAL LEBLEBİCİOĞLU KURTULUŞ |
| 09:45 - 10:00 | Nesim Şahin | Rehabilitation Of A Partial Maxillectomy Patient With An Implant-Supported Obturator Prosthesis: Case Report | ASSOC. PROF. DR. İKBAL LEBLEBİCİOĞLU KURTULUŞ |
| 10:00 - 10:15 | Merve Acar | The effect of glass fiber reinforcement on the fracture toughness of 3D-printed crown material | ASSOC. PROF. DR. İKBAL LEBLEBİCİOĞLU KURTULUŞ |
| 10:15 - 10:30 | Zehra Erkan | Effect of different brushing forces on optical and surface properties of multilayered monolithic zirconia materials | ASSOC. PROF. DR. İKBAL LEBLEBİCİOĞLU KURTULUŞ |
| 10:30 - 10:45 | Arzu Arıcı | Investigation of the long-term effects of polishing protocols on mechanical and aesthetic properties of polyetheretherketone | ASSOC. PROF. DR. İKBAL LEBLEBİCİOĞLU KURTULUŞ |
| 10:45 - 11:00 | Sıla Sevim | Glass fiber incorporation and toothbrushing effect on the color stability of 3D -printed crown material | DR. BORA AKAT |
| 11:00 - 11:15 | Özge Nur Özbey | Short Time, Superior Aesthetics: A Case Series of Immediate Implant Placing and Immediate Loading | DR. BORA AKAT |
| 11:15 - 11:30 | Bilge Demir | Marginal and internal fit of table-top restorations produced by subtractive and additive CAD-CAM methods | DR. BORA AKAT |
| 11:30 - 11:45 | Betül Yüksel | Mechanical Comparison of CAD/CAM Restoratives and Abutments: Cercon xt ML, E.max CAD, VITA Enamic | DR. BORA AKAT |
| 11:45 - 12:00 | Aynur Beyza Çavuşculu Güdül | Surface treatment effects on color stability and roughness of CAD-CAM ceramics | DR. BORA AKAT |
| 12:00 - 12:15 | Murat Ceylan | The Influence of Different Scan Body Heights and Intraoral Scanners on the Accuracy of Digital Implant Impressions | DR. BORA AKAT |
| 12:15 - 12:30 | Beyza Yılık | Effect of Resin Cement Type on Shear Bond Strength to Lithium Disilicate and Leucite-Reinforced Ceramics | DR. BORA AKAT |
| 12:30 - 12:45 | Büşra Nur Gör | The effect of oral care solutions and thermocycling on the color stability of monolithic zirconia restorations with different surface treatments | ASSOC. PROF. DR. ESMA BAŞAK GÜL AYGÜN |
| 12:45 - 13:00 | Oğuzhan Budak | Fracture resistance of conventionally and digitally manufactured complete denture bases: an in vitro study | ASSOC. PROF. DR. ESMA BAŞAK GÜL AYGÜN |
| 13:00 - 13:15 | Merve Sevim Ünal | Evaluation of dental and prosthetic status on nutrition and life quality in geriatric patients | ASSOC. PROF. DR. ESMA BAŞAK GÜL AYGÜN |
| 13:15 - 13:30 | Aycan Akıllı Öztürk | Clinical management of increased vertical dimension in zygomatic implant supported hybrid prostheses using a contemporary substructure material and technique: a case report | ASSOC. PROF. DR. ESMA BAŞAK GÜL AYGÜN |
| 13:30 - 13:45 | Murat Feriz | Evaluation of the Accuracy of Temporary Laminate Restorations Designed Using Two Different Digital Smile Design Software | ASSOC. PROF. DR. ESMA BAŞAK GÜL AYGÜN |
| 13:45 - 14:00 | Burcu Aslan | Comparison of Photogrammetry, Intraoral Scanning, and Conventional Impression Techniques across Varying Implant Configurations in the Edentulous Maxilla: An In Vitro Study | ASSOC. PROF. DR. ESMA BAŞAK GÜL AYGÜN |
| 14:30 - 14:45 | MERT OCAK WORKSHOP | Micro-CT applications in prostodontic research | |
| 14:45 - 15:00 | |||
| 15:00 - 15:15 | |||
| 15:15 - 15:30 | |||
| 15:30 -15:45 | |||
| 15:45 - 16:00 | |||
| 16:00 - 16:15 | |||
| 16:15 - 16:30 | |||
| 16:30 - 16:45 | |||
| 16:45 - 17:00 | |||
| 17:00 - 17:15 | |||
| 17:15 - 17:30 | |||
| 17:30 - 17:45 | |||
| 17:45 - 18:00 |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 09:00 - 09:15 | Asena Şeyma Karartı | Assessment of the Accuracy of Various Impression Methods Using a Digitally Designed Post Space Model | ASSOC. PROF. DR. ŞULE TUĞBA DENİZ |
| 09:15 - 09:30 | Abeer Rauf | Smartphone Applications in Digital Smile Design: A Review on Features, Challenges & Future Directions | ASSOC. PROF. DR. ŞULE TUĞBA DENİZ |
| 09:30 - 09:45 | Yiğit Şahin | Comparative Evaluation of Responses of Different Artificial Intelligence Systems in Answering Questions About Complete Dentures in Prosthetic Dentistry | ASSOC. PROF. DR. ŞULE TUĞBA DENİZ |
| 09:45 - 10:00 | Ecem Sancar | Effect of Different Final Impression Techniques on the Retention of Maxillary Complete Dentures: A Quantitative and Qualitative Evaluation | ASSOC. PROF. DR. ŞULE TUĞBA DENİZ |
| 10:00 - 10:15 | Güzin Şahin | Digital analysis of the effects of different illuminations, shade guides, and clinical experiences on optimal shade selection | ASSOC. PROF. DR. ŞULE TUĞBA DENİZ |
| 10:15 - 10:30 | Filiz Yağcı | Multidisciplinary Management of Amelogenesis Imperfecta: A Comprehensive Case Report | ASSOC. PROF. DR. ŞULE TUĞBA DENİZ |
| 10:30 - 10:45 | Sinem Tatar | Comparative Evaluation of Additive and Subtractive Dental Materials: Stainability and Surface Roughness After Thermocyclin | ASSOC. PROF. DR. ŞULE TUĞBA DENİZ |
| 10:45 - 11:00 | Sena Yadigar | Prosthetic rehabilitation of patients with maxillary defects | ASSOC. PROF. DR. FİLİZ YAĞCI |
| 11:00 - 11:15 | Merin Nur Hacıoğlu | Surgical and Prosthetic Rehabilitation Strategies for Alveolar Ridge Deficiencies: A Clinical Case-Based Perspective | ASSOC. PROF. DR. FİLİZ YAĞCI |
| 11:15 - 11:30 | Serdar Gozler | Dry Needle Treatment for Acute Temporomandibular Disorders (TMD): A Clinical Perspective | ASSOC. PROF. DR. FİLİZ YAĞCI |
| 11:30 - 11:45 | Bensu Buket Yel | Mechanical Properties of Nanoparticle-Enriched with TiO₂, ZnO and ZrO2 in 3D-Printed Denture Base Resins | ASSOC. PROF. DR. FİLİZ YAĞCI |
| 11:45 - 12:00 | Elif Kılıç Kitiz | Screening For Obstructive Sleep Apnea in Dental Clinics: A Comparative Validation of STOP-BANG and Berlin Questionnaries | ASSOC. PROF. DR. FİLİZ YAĞCI |
| 12:00 - 12:15 | Cenkay Durmaz | The effect of composite resin type on the color properties of high translucent zirconia repairs | ASSOC. PROF. DR. FİLİZ YAĞCI |
| 12:15 - 12:30 | Zeynep Didem Kemiksizoğlu | Evaluation of Undergraduate Dental Students’ Awareness of Intraoral Scanners and 3D Printing Technologies | ASSOC. PROF. DR. FİLİZ YAĞCI |
| 12:30 - 12:45 | İdil Göçtü | Prosthetically Driven Digital Implant Workflow with 3D Evaluation of Contact and Seating Position | ASSOC. PROF. DR. GÜLHAN YILDIRIM |
| 12:45 - 13:00 | Burcu Akman | Evalution of Bond Strength Between Reline Materials and Denture Bases Manufactured by Different Techniques | ASSOC. PROF. DR. GÜLHAN YILDIRIM |
| 13:00 - 13:15 | Mustafa Caner Akgül | Digital load-based analysis of bone changes around abutments restored with fixed prostheses following prosthetic principles | ASSOC. PROF. DR. GÜLHAN YILDIRIM |
| 13:15 - 13:30 | Nur Laçin Çınar Doludeniz | Effect of CAD Software on Cement Gap and Intaglio Surface Morphology in Overlay Restorations: An In Vitro Study | ASSOC. PROF. DR. GÜLHAN YILDIRIM |
| 13:30 - 13:45 | Ezgi Maya Ayten | Color Stability of Conventional and 3D-Printed Restorative Materials in Staining Media: An In Vitro Comparison | ASSOC. PROF. DR. GÜLHAN YILDIRIM |
| 13:45 - 14:00 | İremnur Çakmak | Combined Design of Meatus and Fixed Horizontal Pharyngeal Obturators in a Congenital Soft Palate Defect | ASSOC. PROF. DR. GÜLHAN YILDIRIM |
| 14:00 - 14:15 | Saliha Zerdali Ekici | Evaluation of Trainers Perspective on Metaverse Applications in TMJ Education | ASSOC. PROF. DR. TUBA YILMAZ SAVAŞ |
| 14:15 - 14:30 | Ipek Balevi Akkese | Effects of Repeated Firings on Color Stability of CAD-CAM Ceramics | ASSOC. PROF. DR. TUBA YILMAZ SAVAŞ |
| 14:30 - 14:45 | Elifnaz Özen Sütüven | Evaluation of tensile bond strength between impression materials and custom-tray resins fabricated by different methods | ASSOC. PROF. DR. TUBA YILMAZ SAVAŞ |
| 14:45 - 15:00 | Hüseyin Şeker | Effect of combined application of self-etching primer and hydrofluoric acid on the microtensile bond strength between resin cement and polymer-infiltrated ceramic network material | ASSOC. PROF. DR. TUBA YILMAZ SAVAŞ |
| 15:00 - 15:15 | Bengisu Yıldırım | Marginal Fit of Laminate Veneers prepared from Various Materials | ASSOC. PROF. DR. TUBA YILMAZ SAVAŞ |
| 15:15 - 15:30 | Beyzanur Dursun | Evaluation of Dental Students' Clinical Self-Efficacy and Perceptions About Prosthetic Dentistry Practices | ASSOC. PROF. DR. TUBA YILMAZ SAVAŞ |
| 15:30 -15:45 | Senem Güneykaya | Evaluation of the Reasons for Replacement of Fixed Prosthetic Restorations | ASSOC. PROF. DR. RANA TURUNÇ |
| 15:45 - 16:00 | Gulhan Yildirim | Attitudes and Perceptions of Dentists Towards Artificial Intelligence in Türkiye: An Online Survey Study | ASSOC. PROF. DR. RANA TURUNÇ |
| 16:00 - 16:15 | Gülşah Çınar | Evaluation of Model and Scan Body Accuracy in Additively Manufactured and Conventional Stone Models | ASSOC. PROF. DR. RANA TURUNÇ |
| 16:15 - 16:30 | Suzan Eda Eyyupoğlu | Combined Use of PEEK and Titanium Frameworks in the All-on-Four Concept: A Fixed Hybrid Case Report | ASSOC. PROF. DR. RANA TURUNÇ |
| 16:30 - 16:45 | Ayşe Apak | Treatment of Low Vertical Dimension All-One-4 Case with Dİfferent Type of Clinical Approach | ASSOC. PROF. DR. RANA TURUNÇ |
| 16:45 - 17:00 | Sude Nur Hıçkıran | Effect of Cleaning Tablet on the Hardness and Translucency of Different Occlusal Splint Materials | ASSOC. PROF. DR. RANA TURUNÇ |
| 17:00 - 17:15 | Berra Nur Doğan | Evaluation of the Accuracy of Metal Crown Frameworks Fabricated via Selective Laser Sintering at Varying Build Angles and Different Alloys | ASSOC. PROF. DR. DUYGU KÜRKLÜ ARPAÇAY |
| 17:15 - 17:30 | Aybüke Kara | A New Approach in Digital Impression: Evaluation of the Accuracy of Precision Scan Bodies in Full-Arch Implant Restorations | ASSOC. PROF. DR. DUYGU KÜRKLÜ ARPAÇAY |
| 17:30 - 17:45 | Duygu Aksoy | Effect of gastric acid exposure on optical and mechanical properties of various denture base materials | ASSOC. PROF. DR. DUYGU KÜRKLÜ ARPAÇAY |
| 17:45 - 18:00 | Orhun Türkyılmaz | Comparison of Bond Strength of Different Types of Denture Teeth to Two Type Denture Base Materials | ASSOC. PROF. DR. DUYGU KÜRKLÜ ARPAÇAY |
| 18:00 - 18:15 | Nurşah Pervanlar | Is Closed-Bar Design a better option for All-on-Four Concept ? | ASSOC. PROF. DR. DUYGU KÜRKLÜ ARPAÇAY |
| 18:15 - 18:30 | Başak Topdağı | Simultaneous Rehabilitation with Obturator Prosthesis and Orbital Epithesis: A Clinical Case Report | ASSOC. PROF. DR. DUYGU KÜRKLÜ ARPAÇAY |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 09:00 - 09:15 | Gülçin Ersoy | Diode laser treatment as a potential desensitizing method after tooth preparation: a clinical pilot study | ASST. PROF. DR. EMRE DİKER |
| 09:15 - 09:30 | Gökçen Dinçer | Comparative Accuracy of Intraoral Scanner vs Three Photogrammetry Systems in Full-Arch Implant Scanning | ASST. PROF. DR. EMRE DİKER |
| 09:30 - 09:45 | Seray Çapar | Micro-computed tomography evaluation of canal adaptation of 3D posts fabricated using canal dimensions obtained from different digital measurement devices | ASST. PROF. DR. EMRE DİKER |
| 09:45 - 10:00 | Zardasht Najmadine Abdulghafoor | Occlusion, Function, and Form: The Modern Approach to Full Mouth Rehabilitation Using dynamic recording and Conservative Protocols | ASST. PROF. DR. EMRE DİKER |
| 10:00 - 10:15 | Ayşegül Yıldıran | Retrospective Analysis of CAD/CAM Occlusal Splints | ASST. PROF. DR. EMRE DİKER |
| 10:15 - 10:30 | Berkman Albayrak | Fully Digital Workflow in Rehabilitation of Worn Dentition with 3D-Printed Resin Core Build-ups and Zirconia Crowns | ASST. PROF. DR. EMRE DİKER |
| 10:30 - 10:45 | Dağlar Aksakal | Evaluation of the Effect of Different Post-Curing Times and Surface Treatments on Soft Liner Bond Strength in 3D-Printed Denture Base Resins | ASST. PROF. DR. EMRE DİKER |
| 10:45 - 11:00 | Defne Baş | Rehabilitation of a patient with gummy smile and polydiastema using {digitally fabricated monolithic zirconia restorations} | ASSOC. PROF. DR. ALMİRA ADA DİKEN TÜRKSAYAR |
| 11:00 - 11:15 | Büşra Ekin Keskin | The İnfluence of Different Abutment Material And İmplant-Abutment Connection Types on Stress Distribution in Natural Tooth-İmplant Supported Fixed Prostheses: A Three-Dimensional Finite Element Analysis Study | ASSOC. PROF. DR. ALMİRA ADA DİKEN TÜRKSAYAR |
| 11:15 - 11:30 | Tuğba Eraslan Akar | Effect of treatments applied to monolithic zirconium with different thicknesses on surface roughness and bending strength before and after thermal aging | ASSOC. PROF. DR. ALMİRA ADA DİKEN TÜRKSAYAR |
| 11:30 - 11:45 | Nur Sena Alioğlu Koparal | Evaluation of Fit and Manufacturing Trueness of Ti-Base Monolithic Zirconia Restorations: In-Vivo Digital Analysis | ASSOC. PROF. DR. ALMİRA ADA DİKEN TÜRKSAYAR |
| 11:45 - 12:00 | Emre Diker | Clinical Evaluation of Photogrammetry vs. Intraoral Scanning for Passive Fit in Edentulous Jaws | ASSOC. PROF. DR. ALMİRA ADA DİKEN TÜRKSAYAR |
| 12:00 - 12:15 | Zeynep Soylu | Does fiber ribbon reinforcement increase the fracture strength of endodontically treated teeth? | ASSOC. PROF. DR. ALMİRA ADA DİKEN TÜRKSAYAR |
| 12:15 - 12:30 | Murat Küçük | Evaluation of Marginal and Internal Adaptation of Provisional Restorations Fabricated by Different Techniques and Finish Line Designs | ASSOC. PROF. DR. ALMİRA ADA DİKEN TÜRKSAYAR |
| 12:30 - 12:45 | Berker Alpoz | Evaluation of Elastic Recovery and Dimensional Stability of 3D-Printed Versus PVS Gingival Mask Materials | ASSOC. PROF. DR. MERAL MALKOÇ |
| 12:45 - 13:00 | Elif Irem Korkmaz | "Comparative Evaluation of Different Mechanical Test Methods in Additively Manufactured Permanent Resin Materials" | ASSOC. PROF. DR. MERAL MALKOÇ |
| 13:00 - 13:15 | Ilgınsu Akıncı | Estimating occlusal vertical dimension using facial landmarks and deep learning-based models | ASSOC. PROF. DR. MERAL MALKOÇ |
| 13:15 - 13:30 | Cansel Belge | 3D comparison of gingival contours of implant crowns with customized emergence profiles and natural teeth using the aesthetic integration area concept | ASSOC. PROF. DR. MERAL MALKOÇ |
| 13:30 - 13:45 | Tuğba Temizci | Comparison of the Accuracy of Models Obtained with Digital and Conventional Workflows with Respect to Arc Length | ASSOC. PROF. DR. MERAL MALKOÇ |
| 13:45 - 14:00 | Merve Karagöz | Do Build Orientation and Coffee Cycles affect Color Change and Roughness in Silica-based 3D-Permanent Resins? | ASSOC. PROF. DR. MERAL MALKOÇ |
| 14:00 - 14:15 | Nurseli Işıklı | The Effect of Diamond-Like Carbon (DLC) Nanosurface Coating on the Mechanical Performance of PEEK Abutments | ASSOC. PROF. DR. ZEYNEP ŞAHİN |
| 14:15 - 14:30 | Merve Nur Sundu | Follow-up of endo-crown restorations manufactured from fine-structured feldspathic ceramic and advanced lithium disiliate ceramic materials | ASSOC. PROF. DR. ZEYNEP ŞAHİN |
| 14:30 - 14:45 | Sedanur Koşumcu | Effects of different curing light units and glaze materials on surface roughness of 3D-printed resins | ASSOC. PROF. DR. ZEYNEP ŞAHİN |
| 14:45 - 15:00 | Çağlayan Sayla Çelik | effect of hydrothermal aging on color stability of monolithic zirconium dioxide in different formulations | ASSOC. PROF. DR. ZEYNEP ŞAHİN |
| 15:00 - 15:15 | Ezgi Karaca Ceylan | Prosthetic rehabilitation of an acromegalic patient with class III malocclusion: a case report | ASSOC. PROF. DR. ZEYNEP ŞAHİN |
| 15:15 - 15:30 | Buket Yıldız | Prosthetic rehabilitation of two complex cases: bilateral condylectomy and severe class III malocclusion | ASSOC. PROF. DR. ZEYNEP ŞAHİN |
| 15:30 -15:45 | Bengisu Mahmutluoğlu | Effect Of Cigarette Smoking On Dental Zirconia: Substractive Versus Additive | ASSOC. PROF. DR. SERVER MUTLUAY ÜNAL |
| 15:45 - 16:00 | Göksu Elif Göçer | Clinical Application of the STAB Consensus in the Evaluation and Management of Bruxism Patients: A Case-Based Approach | ASSOC. PROF. DR. SERVER MUTLUAY ÜNAL |
| 16:00 - 16:15 | Ceren Deniz Türkeş | This study aimed to evaluate the impact of different scanning methods on the accuracy of interocclusal records using the intraoral scanner | ASSOC. PROF. DR. SERVER MUTLUAY ÜNAL |
| 16:15 - 16:30 | Elif Arya Bulut | Evaluation of the Bond Strength of Fiber Posts Cemented with Different Cements and Techniques | ASSOC. PROF. DR. SERVER MUTLUAY ÜNAL |
| 16:30 - 16:45 | Ezgi Su Sarial | A game-changer connection: Tensile strength between zirconia and PEEK blocks using two different types of primers | ASSOC. PROF. DR. SERVER MUTLUAY ÜNAL |
| 16:45 - 17:00 | Zübeyde Lal Okkaoğlu | Minimally Invasive Management of Anterior Esthetic Deficiencies Using Lithium Disilicate Laminate Veneer Fixed Partial Dentures: A Case Series | ASSOC. PROF. DR. SERVER MUTLUAY ÜNAL |
| 17:00 - 17:15 | Miray Sarıdağ | Impact of gastric acid and on the bond strength between a hybrid ceramic and resin cement: an in vitro study | ASSOC. PROF. DR. KÜBRA DEĞİRMENCİ |
| 17:15 - 17:30 | Fatma Erşil | Precision in full arch rehabilitation: A digital workflow for the Toronto hybrid prosthesis | ASSOC. PROF. DR. KÜBRA DEĞİRMENCİ |
| 17:30 - 17:45 | Tutku Ozgur | Effect of Activated Charcoal Toothpaste on Surface Roughness of Zirconia: A Toothbrushing Simulation Study | ASSOC. PROF. DR. KÜBRA DEĞİRMENCİ |
| 17:45 - 18:00 | Aylin Aynaoglu Ulusoy | Effect of Activated Charcoal Toothpaste on the Surface Roughness of Acrylic and Composite-based Denture Teeth | ASSOC. PROF. DR. KÜBRA DEĞİRMENCİ |
| 18:00 - 18:15 | Begüm Atasoyu Akgün | Fracture Resistance of 3D-Printed Three-Unit Ceramic-Filled Resin Bridges with Varying Connector Designs and Dimensions | ASSOC. PROF. DR. KÜBRA DEĞİRMENCİ |
| 18:15 - 18:30 | Misra Sezen | Prosthetic Rehabilitation Following Post-Oncologic Surgery in a Patient with a Mandibular Floor Defect: A Case Report | ASSOC. PROF. DR. KÜBRA DEĞİRMENCİ |
| 18:30 - 18:45 | Almira Ada Diken Türksayar | Are Additively Manufactured Zirconia Abutments Ready for Clinical Practice? A Mechanical Evaluation | ASSOC. PROF. DR. KÜBRA DEĞİRMENCİ |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 09:00 - 09:15 | Betül Arslan Acicbe | Mechanical Properties of Different Additively Manufactured Definitive Restorations After Thermal Aging | ASST. PROF. DR. BANU UYSAL ÖZEL |
| 09:15 - 09:30 | Necmettin Taşkıran | Evaluation of surface roughness of zirconia blocks with different yttria contents before and after aging after applying different sintering temperatures | ASST. PROF. DR. BANU UYSAL ÖZEL |
| 09:30 - 09:45 | Murat Sıtkı Özmen | In Vitro Evaluation Of Fracture Strength And Marginal Fit Of Titanium Substructures Produced By Additive Manufacturing | ASST. PROF. DR. BANU UYSAL ÖZEL |
| 09:45 - 10:00 | Zeynep Sahin | Advanced Prosthetic Rehabilitation with Maxillary Subperiosteal Implants: Clinical Application of Monolithic Zirconia and Titanium Bars | ASST. PROF. DR. BANU UYSAL ÖZEL |
| 10:00 - 10:15 | Arzu Yıldırım | Is ChatGPT a reliable instrument for prosthetic dentistry? | ASST. PROF. DR. BANU UYSAL ÖZEL |
| 10:15 - 10:30 | Mehmet Ali Akınal | Surface Deformation of Carbide Burs and Its Impact on Monolithic Zirconia Crowns | ASST. PROF. DR. BANU UYSAL ÖZEL |
| 10:30 - 10:45 | Kübra Nur Sönmez Yılmaz | The Degree of Polymerization in 3D Printed Denture Base Materials With Various Post Polymerization Cycles | ASST. PROF. DR. BANU UYSAL ÖZEL |
| 10:45 - 11:00 | Göker Altuntaş | Impact of Dental Education on Shade Matching Skills: A Spectrophotometric Analysis | ASST. PROF. DR. BURCU KANPALTA |
| 11:00 - 11:15 | Büşra Polat | The effect of digital implant analog systems on the accuracy of 3d-printed implant models | ASST. PROF. DR. BURCU KANPALTA |
| 11:15 - 11:30 | Yuki Mouri | Effect of cross-linker incorporation on mechanical properties of additive-manufactured occlusal splint material | ASST. PROF. DR. BURCU KANPALTA |
| 11:30 - 11:45 | Alper Topaçoğlu | Diagnosis and Individualized Management of TMJ Synovitis with Secondary Symptoms: A Case Report | ASST. PROF. DR. BURCU KANPALTA |
| 11:45 - 12:00 | Cemre Nilüfer Çınkır | The effect of soft tissue retractors on the accuracy of digital impressions: a pilot study | ASST. PROF. DR. BURCU KANPALTA |
| 12:00 - 12:15 | Mustafa Şimşek | Prosthetic Rehabilitation of Single-Tooth Deficiencies with Implant-Supported Crowns: A Case Series | ASST. PROF. DR. BURCU KANPALTA |
| 12:15 - 12:30 | Hyun Tae Kim | Complete-Arch Rehabilitation Using a Digitalized Twin-Stage Technique | ASST. PROF. DR. BURCU KANPALTA |
| 12:30 - 12:45 | Burcu Nur Öztürk | Virtual Fit Of Occlusal Devices: A Comparative Analysis Of Exocad And InLab Software Programs | ASST. PROF. DR. CUMHUR KORKMAZ |
| 12:45 - 13:00 | Bahar Merve Ünal Ünlü | Shaping the emergence profile using a 3D-printed provisional crown: a soft tissue management approach | ASST. PROF. DR. CUMHUR KORKMAZ |
| 13:00 - 13:15 | Magdalena Osiewicz | Wear of bulk-fill resin composites | ASST. PROF. DR. CUMHUR KORKMAZ |
| 13:15 - 13:30 | Hüsniye Soğancı | Evaluating Reliability, Usefulness, and Quality of Chatbots in Temporomandibular Disorders | ASST. PROF. DR. CUMHUR KORKMAZ |
| 13:30 - 13:45 | Berfin Nur Eriş Boyraz | Immediate loading of implants placed by guided surgery with maxillary and mandibular all-on-4 technique: a case report | ASST. PROF. DR. CUMHUR KORKMAZ |
| 13:45 - 14:00 | Seher Gönenir | Evaluation of complete dentures fabricated by second-year dental students in preclinical laboratory: A quantitative analysis based on eight criteria | ASST. PROF. DR. CUMHUR KORKMAZ |
| 14:00 - 14:15 | Büşra Bozdoğan | Effect of implant depth, tooth presence and scan strategy on digital impression trueness | ASST. PROF. DR. GÖKÇEN DİNÇER |
| 14:15 - 14:30 | Tuğçe Koç | Evaluation Of Fracture Strength Of The Conventional And Digital Provisional Crowns After Thermal Ageing | ASST. PROF. DR. GÖKÇEN DİNÇER |
| 14:30 - 14:45 | Furkan Ali Özçifçi | Evaluation of the knowledge level and clinical use related to intraoral scanners and 3D printers of dentists in the Central Anatolian Region of Turkey | ASST. PROF. DR. GÖKÇEN DİNÇER |
| 14:45 - 15:00 | Tatiana Fedotova | Digital Diagnostics of Temporomandibular Joint Function in Professional Flutists: A Non-Invasive Approach Using Hardware-Software Systems | ASST. PROF. DR. GÖKÇEN DİNÇER |
| 15:00 - 15:15 | Matshediso Mothopi Peri | Effective use of cognitive interviews in validating questionnaires in a head and neck multidisciplinary study | ASST. PROF. DR. GÖKÇEN DİNÇER |
| 15:15 - 15:30 | Serhat Aydınlı | Immediate and Delayed Restoration in Implant Treatment for Single Tooth Replacement – A Case Series | ASST. PROF. DR. GÖKÇEN DİNÇER |
| 15:30 -15:45 | Ozge Yildiz | The Effect of Aluminum Oxide and Zirconium Oxide Additions on the Mechanical Properties of a Flowable Composite Resin | ASST. PROF. DR. İZIM TÜRKER KADER |
| 15:45 - 16:00 | Elif Selen Aşıcı | Accuracy of 3 different printers at marginal, internal and occlusal surfaces | ASST. PROF. DR. İZIM TÜRKER KADER |
| 16:00 - 16:15 | Özgü Gültekin | Impact of Different Designs for Adhesive Restorations and the Intraoral Scanner Trueness of Digital Scans | ASST. PROF. DR. İZIM TÜRKER KADER |
| 16:15 - 16:30 | Minh Le | Surface Cleaning Enhances Adhesion Between Resin Cement and Translucent Zirconia | ASST. PROF. DR. İZIM TÜRKER KADER |
| 16:30 - 16:45 | Tuğba Altınbaş | Effect of thermal cycling and printing angulation on the flexural strength of 3d-printed denture base resins: A pilot study | ASST. PROF. DR. İZIM TÜRKER KADER |
| 16:45 - 17:00 | Ilkay Baltacı | İnvestigation of the effects of prosthesis cleaning solutions on the surface properties of base materials applied with different polishing methods | ASST. PROF. DR. İZIM TÜRKER KADER |
| 17:00 - 17:15 | Tuğba Ak Açıkgöz | Pull Out Bond Strength Of Different Cements Used In Implant-Supported Fixed Restorations | ASST. PROF. DR. BERKMAN ALBAYRAK |
| 17:15 - 17:30 | Gülay Kamiş | Translucency and color masking ability of a hybrid CAD/CAM material with different thicknesses | ASST. PROF. DR. BERKMAN ALBAYRAK |
| 17:30 - 17:45 | Binnaz Açık | Viability of HGF-1 Cells on Titanium Surfaces Coated with Two-Dimensional (2D) Carbon-Based Materials | ASST. PROF. DR. BERKMAN ALBAYRAK |
| 17:45 - 18:00 | Joyce A. Jonker | Clinical survival of lithium disilicate cantilever resin-bonded fixed dental prosthesis | ASST. PROF. DR. BERKMAN ALBAYRAK |
| 18:00 - 18:15 | Sıla Sucuka | Patient Satisfaction in Implant Supported Prosthesis Treatments of Kırıkkale University Faculty of Dentistry between 2021-2025 | ASST. PROF. DR. BERKMAN ALBAYRAK |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 09:00 - 09:15 | Beyza Tekin Onuş | “Mandibular Kinematics Analysis with MODJAW After Digital Full-Mouth Rehabilitation of Severely Worn Dentition: Case Report” | ASST. PROF. DR. AYŞE RENÇBER KIZILKAYA |
| 09:15 - 09:30 | Cansu Yeşildağ | Implant Supported Hybrit Prothesis In A Post-Myxoma Resection Patient: A Prosthodontic Perspective | ASST. PROF. DR. AYŞE RENÇBER KIZILKAYA |
| 09:30 - 09:45 | Mevhide Melike Özen | In Vivo Evaluation of the Accuracy and Repeatability of Different Tooth Shade Determination Methods | ASST. PROF. DR. AYŞE RENÇBER KIZILKAYA |
| 09:45 - 10:00 | Ceren Karaahmetoğlu | Comparative Evaluation of Optical Properties of Nano-Lithium Disilicate Ceramics with Different Crystallization Types after Various Polishing Protocols and Coffee Staining | ASST. PROF. DR. AYŞE RENÇBER KIZILKAYA |
| 10:00 - 10:15 | Ayşe Nur Guran | Selective laser melting yields superior metal-ceramic bond strength over conventional casting regardless of firing cycles | ASST. PROF. DR. AYŞE RENÇBER KIZILKAYA |
| 10:15 - 10:30 | Ayşe Ecehan Erol | The Effect of Various Surface Treatments on the Tensile Bond Strength of Denture Base Materials | ASST. PROF. DR. AYŞE RENÇBER KIZILKAYA |
| 10:30 - 10:45 | Burcu Yılmaz | Evaluation of the Effect of Increasing the Occlusal Vertical Dimension on Condylar Parameters Using MODJAW: A Clinical Study | ASST. PROF. DR. AYŞE RENÇBER KIZILKAYA |
| 10:45 - 11:00 | Arwa Ibrahim Al Husban | Retention Enhancement in Complete Dentures Using Octopus-Inspired Suction Cups with various Directional Forces | ASSOC. PROF. DR. AYÇA DENİZ İZGİ |
| 11:00 - 11:15 | Ebru Ekmekçi Ertan | Comparison of I-physio Profile Designer Concept with Standard Gingiva Former: A Randomized Controlled Prospective Study | ASSOC. PROF. DR. AYÇA DENİZ İZGİ |
| 11:15 - 11:30 | Züliye Kurultay | Prosthetic Rehabilitation of a Bruxist Patient Requiring Increasing Vertical Dimension: A Case Report | ASSOC. PROF. DR. AYÇA DENİZ İZGİ |
| 11:30 - 11:45 | Elchin Abbasov | Aesthetic and Functional Rehabilitation with Zirconia-Based Restorations on Teeth and Implants: A Clinical Case Report | ASSOC. PROF. DR. AYÇA DENİZ İZGİ |
| 11:45 - 12:00 | Ezgi Apaydın | Prosthetic Rehabilitation with Bar-Supported Telescopic Crowns: A Case Report | ASSOC. PROF. DR. AYÇA DENİZ İZGİ |
| 12:00 - 12:15 | Elif Köseoğlu | full mouth implant rehabilitation of non-syndromic severe jaw bone resorption with bicortical iliac bone grafting: technical note | ASSOC. PROF. DR. AYÇA DENİZ İZGİ |
| 12:15 - 12:30 | Cansu Erkan | Evolving Aesthetic Perception in Dental Students Across Academic Years | ASSOC. PROF. DR. AYÇA DENİZ İZGİ |
| 12:30 - 12:45 | CENGİZ HAN ŞAHİN | Comparative Estimation of Occlusal Contact Points Obtained with 2 Different Digital Systems with Artificial Intelligence | ASST. PROF. DR. MESUT TUZLALI |
| 12:45 - 13:00 | Elif Ayça Aslanbay | Comparison of Translucency Parameter of Different 3D- Printed Permanent Restorative Resins | ASST. PROF. DR. MESUT TUZLALI |
| 13:00 - 13:15 | Ali Moradi | Evaluating and comparing accuracy of google gemini ai and perplexity ai in responding to patients’ frequently asked questions in prosthodontics | ASST. PROF. DR. MESUT TUZLALI |
| 13:15 - 13:30 | Fatima Osman | Comparative evaluation of chatGPT and perplexity AI in delivering accurate information on complete dentures: an expert-based analysis | ASST. PROF. DR. MESUT TUZLALI |
| 13:30 - 13:45 | Merve Topaloğlu | The reliability of ai-based information in implant-supported prostheses: a multidimensional evaluation of chatgpt | ASST. PROF. DR. MESUT TUZLALI |
| 13:45 - 14:00 | Alper Aktosun | Evaluation of the Accuracy of Different Intraoral Scanners in Complete Denture Digitization | ASST. PROF. DR. MESUT TUZLALI |
| 14:00 - 14:15 | Ebru Arslan | Occlusal splint therapy in a patient with tremor: a case report | ASST. PROF. DR. SİNA SAYGILI |
| 14:15 - 14:30 | Simge Alat | The Effect of Thermal Aging on The Mechanical Properties of CAD/CAM Milled and Conventional Heat-Polymerized PMMA Denture Base Resin | ASST. PROF. DR. SİNA SAYGILI |
| 14:30 - 14:45 | Gül Ateş | TikTok Videos and Smile Design: Evaluation of Content, Reliability, and Quality | ASST. PROF. DR. SİNA SAYGILI |
| 14:45 - 15:00 | Gözde Gökçen Demir | A Hybrid Telescopic-Implant Overdenture Rehabilitation Following Premaxillary Resection: A Case Report with 3D-Printed Gothic Arch Tracing for Mandibular Guidance and a Literature Review | ASST. PROF. DR. SİNA SAYGILI |
| 15:00 - 15:15 | Merve Ünal | Translucency of CAD/CAM Ceramics: Effect of Thickness, Cement Shade, and Background Color | ASST. PROF. DR. SİNA SAYGILI |
| 15:15 - 15:30 | Iva Biloš | Oral health-related quality of life and quality of dental prostheses in older adults | ASST. PROF. DR. SİNA SAYGILI |
| 15:30 -15:45 | Yaprak Aksöyek | Clinical Applications of Different Screw-Retained Abutment Selections in Implant-supported Fixed Prostheses: Four Case Reports | ASST. PROF. DR. BURCU KANAT-ERTÜRK |
| 15:45 - 16:00 | Ayşe Şenyıl | 3D-Assessment and Accuracy of Different AI-Based and Conventional CAD for Crowns and Fixed Prostheses | ASST. PROF. DR. BURCU KANAT-ERTÜRK |
| 16:00 - 16:15 | Saliha Oruç | Accuracy of Maxillo-Mandibular Relationship Records with Digital Ti-base Monolithic Zirconia Restorations in Premolar/Molar Regions | ASST. PROF. DR. BURCU KANAT-ERTÜRK |
| 16:15 - 16:30 | Ayşenur AKDEDE | Investigation of the Effect of Different Grit Diamond Burs on Surface Roughness After Tooth Preparation | ASST. PROF. DR. BURCU KANAT-ERTÜRK |
| 16:30 - 16:45 | MELİKE ÖZBAYKAL | A Comparative Evaluation of TMJ Vibration Analysis and DC/TMD-Forms In The Diagnosis of Temporomandibular Disorders | ASST. PROF. DR. BURCU KANAT-ERTÜRK |
| 16:45 - 17:00 | Alptekin Yusuf Kök | Comparison of Maxillary Impression Techniques in Completely Edentulous Patients: An Analysis of Internal Prosthesis Fit Using Digital and Conventional Methods | ASST. PROF. DR. BURCU KANAT-ERTÜRK |
| 17:00 - 17:15 | Bilgehan Kottaş | Influence of Finishing and Storage Media on Color and Surface Roughness of 3D-Printed Permanent Resin | ASST. PROF. DR. RÜŞTÜ ERSOY SAKARYA |
| 17:15 - 17:30 | Beyza Betül Şencan | Exploring Dental Students’ Perspectives on Teledentistry | ASST. PROF. DR. RÜŞTÜ ERSOY SAKARYA |
| 17:30 - 17:45 | FATIMA ALIZADA | Evaluation of Canine and Molar Occlusal Contact on Maxillomandibular Relationship Accuracy in 3D-Printed Models | ASST. PROF. DR. RÜŞTÜ ERSOY SAKARYA |
| 17:45 - 18:00 | Safa Ozer | Mechanical performance of {additively manufactured ceramic-filled hybrid resin FDPs} following various thermocycling durations | ASST. PROF. DR. RÜŞTÜ ERSOY SAKARYA |
-
Main Hall
-
Oral Presentation Hall 1
-
Oral Presentation Hall 2
-
Oral Presentation Hall 3
-
Oral Presentation Hall 4
-
Oral Presentation Hall 5
| Time | Chairs | Speaker | Lecture | |
| 09:00 - 10:00 | Prof. Dr. Yasemin Keskin | Prof. Dr. Pervin İmirzalıoğlu | Prof.Dr. Gerry Raghoebar | Bone: The Basis for Successful Prosthodontic Treatment with Implants – From the Past to the Future. |
| 10:00 - 11:00 | Prof. Dr. Nuray Çapa Yıldırım | Prof. Dr. Bora Bağış | Prof. Dr. Roberto Sorrentino | Restorative Materials and Luting Agents: A Combined Approach to Modern Prosthodontics with High Esthetic Demands |
| 11:00 - 11:15 | Coffee Break | |||
| 11:15 - 12:15 | Prof. Dr. Yalçın Değer | Prof. Dr. Özlem Kara | Prof. Dr. Christian Makary | Rules and Guidelines for Perfect Esthetics: The Implant Sets the Tone |
| 12:15 - 13:15 | George Aristidou | Prof. Dr. Kerem Kılıç | Daniele Rondoni | Beyond Boundaries: The New Era of Zirconia in Modern Aesthetic Restorations |
| 13:15 - 14:15 | Lunch | |||
| 14:15 - 15:15 | Teresa Sierpinska | Prof. Dr. Ali Rıza Tunçdemir | Dr. John A. Sorensen | New Frontiers In Digital Prosthodontics: Integrating Digital Materials, Digital Technology and Traditional Prosthodontic Principles Into Clinical Practice. |
| 15:15 - 16:15 | Awards and Closing Ceremony | |||
| 16:15 - 16:45 | Annual Business Meeting | |||
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 09:00 - 09:15 | Feyza Ayaz | Evaluation of the Effect of Edentulism on Condylar Trabecular Structure Using Fractal Analysis (Retrospective Study) | ASST. PROF. DR. ÖZER İŞİSAĞ |
| 09:15 - 09:30 | Nedime Zeynep Yazar Özdemir | The effect of commonly used polishing protocols on the color stability of 3D- printed temporary crowns | ASST. PROF. DR. ÖZER İŞİSAĞ |
| 09:30 - 09:45 | Norina Consuela Forna | Immediate loading and digital planning: new standards in implant prosthodontics | ASST. PROF. DR. ÖZER İŞİSAĞ |
| 09:45 - 10:00 | Mihriban Uçar Kartal | The effect of scanning time and number of images on the accuracy of intraoral digital scans | ASST. PROF. DR. ÖZER İŞİSAĞ |
| 10:00 - 10:15 | Tuğçe Odabaş Hajiyev | The effect of a modified preparation design on the marginal and internal fit of endocrowns: a triple scan study | ASST. PROF. DR. ÖZER İŞİSAĞ |
| 10:15 - 10:30 | Gamze Karacali | Comparative Evaluation of Microhardness of Provisional Crown and Bridge Materials Produced with Different Polymerization Protocols: An In vitro Study | ASST. PROF. DR. ÖZER İŞİSAĞ |
| 10:30 - 10:45 | Abdulhakim Kanlıdere | The effect of different restorative materials on the efficacy of intraoral scanners | ASST. PROF. DR. BURCU YILMAZ |
| 10:45 - 11:00 | Gülsu Naz Acarlar | Assessment of Dental Students Knowledge, Attitudes, and Experiences Concerning 3D Printing Technologies | ASST. PROF. DR. BURCU YILMAZ |
| 11:00 - 11:15 | Alara Güler | The Contribution of Digital Smile Design to Multidisciplinary Treatment Processes in Aesthetic Dentistry: A Case Report | ASST. PROF. DR. BURCU YILMAZ |
| 11:15 - 11:30 | Seval Fatma Yılmaz | Dental Shade Assessment via Various Digital Photograph Parameters: A Pilot Study | ASST. PROF. DR. BURCU YILMAZ |
| 11:30 - 11:45 | Ozden Melis Durmaz Yilmaz | {Smartphone-based shade matching in prosthodontics: a game changer in daily practice?} | ASST. PROF. DR. BURCU YILMAZ |
| 11:45 - 12:00 | Nihan Mertcan | Preferences of Dentists for Reuse and Sterilization Protocols of Implant Healing Abutments: A Survey Study | ASST. PROF. DR. BURCU YILMAZ |
| 12:00 - 12:15 | Nur Uysal | Effect of Post-Processing Alcohol Washing Time on the Hardness and Flexural Strength of 3D-Printed Permanent Dental Resins | ASST. PROF. DR. ŞÜKRİYE ECE DOĞAN |
| 12:15 - 12:30 | Berçem Bozkurt | Effect of Different Color and Size Auxiliary Geometric Parts on Digital Implant Measurement Accuracy: A Comparison Study | ASST. PROF. DR. ŞÜKRİYE ECE DOĞAN |
| 12:30 - 12:45 | Mustafa Ata Çakaloğlu | Prosthetic Restoration Fabrication in The Virtual Patient Constructed Through The Integration of 4D Dynamic Occlusion Records: A Case Report | ASST. PROF. DR. ŞÜKRİYE ECE DOĞAN |
| 12:45 - 13:00 | Refika Er | Effect of Hexagonal Boron Nitride Addition on Mechanical Properties of Maxillofacial Silicone Elastomers | ASST. PROF. DR. ŞÜKRİYE ECE DOĞAN |
| 13:00 - 13:15 | Neşe Cızıroğlu | Influence of orange juice and an immune-enhancing drink on surface roughness and optical properties of 3D-printed resins produced with various layer thicknesses | ASST. PROF. DR. ŞÜKRİYE ECE DOĞAN |
| 13:15 - 13:30 | Gizem Beste Yıldırım | Comprehensive Prosthetic Rehabilitation with Multilayered Zirconia Supported by Additional Mono-Implants Following Early Implant Failure: A Clinical Case Report" | ASST. PROF. DR. ŞÜKRİYE ECE DOĞAN |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 09:00 - 09:15 | Elif Coşkun | Bond Strength Between Denture Lining Materials and Different Manufactured Denture Base Materials: A Systematic Review | ASST. PROF. DR. ZEYNEP İRKEÇ |
| 09:15 - 09:30 | Tuğba Kaya | Effect of Post-Polymerization Time on Flexural Strength and Surface Roughness of PMMA Materials Fabricated by Conventional and Additive Manufacturing Techniques: An In Vitro Study | ASST. PROF. DR. ZEYNEP İRKEÇ |
| 09:30 - 09:45 | Dilaycan Uğureli | The effect of thermal aging on the hardness of cleaned polymethyl methacrylate | ASST. PROF. DR. ZEYNEP İRKEÇ |
| 09:45 - 10:00 | Halil Nuri ÖZDEMİR | In vitro evaluation of bond strength, sorption, and solubility of the cleanser's effects on 3D-printed prosthesis bases | ASST. PROF. DR. ZEYNEP İRKEÇ |
| 10:00 - 10:15 | Esra Ayşe Dilaverler Yardım | In Vitro Evaluation of Methyl Methacrylate (MMA) Release from Different Temporary Denture Base Materials | ASST. PROF. DR. ZEYNEP İRKEÇ |
| 10:15 - 10:30 | Yunus Emre Ozden | The Impact of Different Cavity Design Parameters on Intraoral Scanner Accuracy in Endocrown Restorations | ASST. PROF. DR. MERVE ÜNAL |
| 10:30 - 10:45 | Halenur Bilir | Minimizing Occlusal Adjustments: The Clinical Impact of AI, Jaw Motion and Digital Design Tools | ASST. PROF. DR. MERVE ÜNAL |
| 10:45 - 11:00 | Seçil Sakarya | Investigation of mechanical properties of different CAD/CAM denture base materials | ASST. PROF. DR. MERVE ÜNAL |
| 11:00 - 11:15 | Sümeyye Kılıçlar | Contemporary perspectives on dental aesthetic perception | ASST. PROF. DR. MERVE ÜNAL |
| 11:15 - 11:30 | Abdullah Yaşar Olkun | Video-Assisted Learning on YouTube in Dentistry Education: The Impact of Overdenture Videos on Dentistry Students | ASST. PROF. DR. MERVE ÜNAL |
| 11:30 - 11:45 | Selda Gökçe Erdal | Influence of toothbrushing and toothpaste on surface roughness and color stability of CAD/CAM interim crown material | ASST. PROF. DR. MERVE ÜNAL |
| 11:45 - 12:00 | Nurullah Gökçe | The effect of dıfferent ısolatıon methods on resıdual cement ın ımplant-supported crowns wıth cement retaıners wıth dıfferent gıngıval levels | ASSOC. PROF. DR. ESRA TALAY ÇEVLİK |
| 12:00 - 12:15 | Serap Sasa | Complete-Arch Implant-Supported Monolithic Zirconia Fixed Dental Prostheses: A Case Series | ASSOC. PROF. DR. ESRA TALAY ÇEVLİK |
| 12:15 - 12:30 | Ceren Nevin Güler | Rehabilitation of severely atrophic maxilla and mandible with custom-made subperiosteal implants: a case report | ASSOC. PROF. DR. ESRA TALAY ÇEVLİK |
| 12:30 - 12:45 | Rojda Demirbilekli | Rehabilitation of short edentulous spaces with fiber-reinforced composite bridges in patients who are not eligible for ımplant treatment and do not accept tooth preparation: a case series | ASSOC. PROF. DR. ESRA TALAY ÇEVLİK |
| 12:45 - 13:00 | Merve Uzun | The Influence of Demographic Factors on Tooth Translucency: Variations by Race, Gender, and Age | ASSOC. PROF. DR. ESRA TALAY ÇEVLİK |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 09:00 - 09:15 | Delgermaa Nanzad | Digital Workflow in Obstructive Sleep Apnea Treatment with MODJAW: Case Report | ASST. PROF. DR. RAVZA ERASLAN |
| 09:15 - 09:30 | Pınar Şeşen | Effect of curing cycles and coffee thermocycling on the color stability of 3D printed definitive restoration materials | ASST. PROF. DR. RAVZA ERASLAN |
| 09:30 - 09:45 | Cansu Akarsu | Laminate Veneers on Premolars: The Role of Preparation Designs and Ceramic Materials | ASST. PROF. DR. RAVZA ERASLAN |
| 09:45 - 10:00 | Gökçe Zengin | Evaluation of Monolayered and Multilayered Monolithic Zirconia Crowns Fabricated with Different Milling Depths | ASST. PROF. DR. RAVZA ERASLAN |
| 10:00 - 10:15 | Zeynep Ermiş | AI-generated patient guidance on maxillofacial prosthetics: a pilot study comparing chatgpt-4 and copilot | ASST. PROF. DR. RAVZA ERASLAN |
| 10:15 - 10:30 | Gökhan Arıkan | Immediate Prosthetic Loading in Fully Edentulous Jaws: A Case Series | ASST. PROF. DR. RAVZA ERASLAN |
| 10:30 - 10:45 | Cem Baysal | Comparative evaluation of two crestal approach sinus lifting techniques using 3d cbct imaging | ASST. PROF. DR. MEHMET BERK KAFFAF |
| 10:45 - 11:00 | Ümitcan Kılıç | TMD assessment in dental students during exam period | ASST. PROF. DR. MEHMET BERK KAFFAF |
| 11:00 - 11:15 | Şevval Sucuoğlu Kırteke | Influence of polishing procedures on surface roughness of additively manufactured resin-based crown materials | ASST. PROF. DR. MEHMET BERK KAFFAF |
| 11:15 - 11:30 | Bahar Karci | The effect of gastric acid on the properties of 3D-printed temporary resin materials | ASST. PROF. DR. MEHMET BERK KAFFAF |
| 11:30 - 11:45 | Esma Demirtaş | Effects of Whitening Mouthwashes on Color Stability and Translucency of 3D-Printed Dental Resin | ASST. PROF. DR. MEHMET BERK KAFFAF |
| 11:45 - 12:00 | Melek Özdemir | The effect of adjacent teeth on the digital accuracy of the intraoral scanners | ASST. PROF. DR. MEHMET BERK KAFFAF |
| 12:00 - 12:15 | Sule Tugba Deniz | Evaluation of Deformations Occurring After Porcelain Firing in Metal-Ceramic Restorations | ASST. PROF. DR. KÜBRA YILDIZ DOMANİÇ |
| 12:15 - 12:30 | Zeynep Çobanoğlu | Evoluating The Knowledge Level of Dentists About Prosthetic Procedures Performed In Mobile Dental Services | ASST. PROF. DR. KÜBRA YILDIZ DOMANİÇ |
| 12:30 - 12:45 | Dilan Güner Süer | Prosthetic Rehabilitation of an Edentulous Maxilla Using an Intra-Bar Reinforced Monolithic Zirconia Restoration: A Case Report | ASST. PROF. DR. KÜBRA YILDIZ DOMANİÇ |
| 12:45 - 13:00 | Kübra Aycan Tavuz | Evaluation of flexural strength of additively manufactured resin materials compared to auto-polymerized provisional resin with and without hydrothermal aging | ASST. PROF. DR. KÜBRA YILDIZ DOMANİÇ |
| 13:00 - 13:15 | Yaseen Zain Eddin | Digital Smile Design and Veneer Restoration Using a Fully Digital Prosthodontic Workflow: A Case Report | ASST. PROF. DR. KÜBRA YILDIZ DOMANİÇ |
| 13:15 - 13:30 | Atamer Tirik | Investigation of Microhardness, Surface Roughness Values of Current Removable Partial Denture Frameworks Before and After Brushing Simulator | ASST. PROF. DR. KÜBRA YILDIZ DOMANİÇ |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 09:00 - 09:15 | Ersel Malkoç | Prosthetic Rehabilitation of Patients with Reduced Vertical Occlusal Dimension: Three Case Report | ASST. PROF. DR. DAMLA GÜNEŞ ÜNLÜ |
| 09:15 - 09:30 | Müge Yiğit | The knowledge performance of Chatgpt and Abacus AI applications in the dental specialty examination | ASST. PROF. DR. DAMLA GÜNEŞ ÜNLÜ |
| 09:30 - 09:45 | Berfin Sumru Uğur | Resin-Bonded Fixed Dental Prostheses for the Treatment of Congenital Lateral Incisor Agenesis: A Multidisciplinary Approach | ASST. PROF. DR. DAMLA GÜNEŞ ÜNLÜ |
| 09:45 - 10:00 | Gamze Büyükturhan | Influence of Cut-Rescan Strategies on the Accuracy of Preparation Area Scans with Different Intraoral Scanners | ASST. PROF. DR. DAMLA GÜNEŞ ÜNLÜ |
| 10:00 - 10:15 | Destina Suay Sari | Effect of Denture Cleansing Solutions on Physical Properties of 3D-Printed and Heat-Polymerized Denture Base Resins | ASST. PROF. DR. DAMLA GÜNEŞ ÜNLÜ |
| 10:15 - 10:30 | Berfu Erhan | Nanoparticles in Denture Liners: Roughness and Color Effects | ASST. PROF. DR. DAMLA GÜNEŞ ÜNLÜ |
| 10:30 - 10:45 | Fatih Sarı | Er:YAG laser debonding of lithium disilicate and lecuite laminate veneers: effect of laser power setting on the debonding time and pulpal temperature | ASST. PROF. DR. İLKNUR USTA KUTLU |
| 10:45 - 11:00 | Berfin Yildiz | Effect of Er:YAG and Nd:YAG laser irradiation on the bond strength of a resin cement | ASST. PROF. DR. İLKNUR USTA KUTLU |
| 11:00 - 11:15 | Simay Bozkurt | Effect of Nanoparticle Incorporation on the Physical Properties of Acrylic Resins | ASST. PROF. DR. İLKNUR USTA KUTLU |
| 11:15 - 11:30 | Ayşenur Uludağ | Evaluation of the Effectiveness of Anterior Repositioning Splint Therapy in Patients with Balancing Side Contact Occlusion: A Clinical Study | ASST. PROF. DR. İLKNUR USTA KUTLU |
| 11:30 - 11:45 | Pelin Açık | Evaluation of the effect of sintering speed and temperature on the microstructure, bend strength, and optical properties of monolithic zirconia | ASST. PROF. DR. İLKNUR USTA KUTLU |
| 11:45 - 12:00 | Ece Elçi | Effect of restoration thickness and cement color on the translucency of CAD/CAM resin nanoceramic material | ASST. PROF. DR. İLKNUR USTA KUTLU |
| 12:00 - 12:15 | Ravza Eraslan | Palatal perforation closure using a hawley-type appliance in a patient with sarcoidosis | ASST. PROF. DR. SİNEM VURAL |
| 12:15 - 12:30 | Mustafa KOCACIKLI | Modification of torque screw driver to release multiunit abutment which has broken screw | ASST. PROF. DR. SİNEM VURAL |
| 12:30 - 12:45 | Sena Albayrak | Accuracy of Intraoral Scanners and a Spectrophotometer in Shade Determination | ASST. PROF. DR. SİNEM VURAL |
| 12:45 - 13:00 | Büşra Sarıkaya | Effect of Thermal Aging on the Microhardness and Color Stability of CAD/CAM Composite-Based Blocks: A Pilot Study | ASST. PROF. DR. SİNEM VURAL |
| 13:00 - 13:15 | Emre Sefa Çi̇ni̇ | Using 3D printing technology for autotransplantation of teeth: a case report | ASST. PROF. DR. SİNEM VURAL |
| Time | Presenter | Topic | Chair |
|---|---|---|---|
| 10:00 - 11:00 | Doç. Dr. Naci Murat | Statistical Traps: Uncovering the Hidden Reasons Behind Manuscript Rejections | workshop |
